First, some background. A few years ago, I got tired of seeing arborists buzzing up good logs into firewood-sized chunks- those were logs that I could've put to much better use, frankly. So I started scheming. My thinking went like this:
If I had a sawmill, I could mill those logs into lumber on the cheap. Well, sawmills aren't exactly free, so scratch that idea. Plus I don't have the time, space, or energy.
But... I found a couple of sawmills in our area that said they'd happily saw up logs for me if I could just get them there.
So that became the problem. Logs are heavy- easily 1000 pounds- and my old pickup isn't really sturdy enough. Plus I don't have a team of strong guys at my beck and call. And if I did, I'd have to pay them, which would really fly in the face of the whole "on the cheap" premise that I was trying to work with.
But... I could get a trailer. Except then I'd have to store it. Plus I don't want to own a trailer that really just sits around taking up space 99.9% of the time. And they're not exactly free, either.
Finally, though, I figured it out. I came up with a way to get lumber from logs with minimal heavy lifting and minimal work. Let's face it: necessity may be the mother of invention but laziness is definitely its father. In other words, while I do plenty of heavy lifting on a regular basis, I'm not looking for more.
Here's the behind-the-scenes reality that makes The Plan possible: arborists have to load up the "waste" (aka treasure in the form of logs) at the end of a job anyway, and they have to unload it at a dump or green waste facility or something like that. They often have cranes or other heavy equipment to make short work of this.
1) Find an arborist. Have them drop the logs at your sawmill instead of their trash heap.
2) Slide them some cash for their time and trouble.
3) Wait for the sawmill to call when your boards are ready.
I did a test run with a 1000bf of mixed of different species, and paid about $.75/foot for the lumber. Much of it was 18" wider or more- try finding that stuff in profusion at your regular lumber retailer. In researching the topic, I found that $.50-$1.00/board foot seems to be pretty average for having lumber sawn. The result: a total success. I'll keep doing it.
In general, the yield won't be all primo lumber, so there'll be some waste (or "rustic" grade). FYI.
Not all logs are created equal. Some species, widths, and grain patterns are more coveted than others.
You can specify the thicknesses you want
You can leave live edges or have them milled off
If the logistics are right, you might be able to have a portable bandsaw mill come to your site.
Some sawyers will allow you to be on hand during the sawing so you can have input into how it is done
Some sawmills will have a minimum charge, so you may want to make sure to have a few logs piled up before they fire up the mill. This shouldn't be too hard to arrange.
As for drying the wood- I usually go with air drying (1 year per inch as a rule of thumb), but my sawmill has a kiln, which you can use and then you'll have ready-to-use lumber in just a couple of months for a small extra charge.